MANUS Core 2.3 | Updating MANUS Core
Note: This article applies to both Prime 3 Haptic XR Gloves and Prime 3 Mocap Gloves
Note: This article applies to both Quantum Mocap Metagloves and Quantum XR Metagloves.
Introduction
This article describes how to update MANUS Core to the latest version, automatically or manually.
MANUS Core Types
On our Download Center two different versions of MANUS Core can be found.
MANUS Core - Installer
Our MANUS Core – Installer, depending on the version, will install MANUS Core with automatic updating capabilities. This means that MANUS Core will keep up to date, or notify you when a newer version is available.
MANUS Core - Version Locked Installer
If you are looking for a specific version of MANUS Core for any reason, you can download the Version Locked MANUS Core from our Download Center. This version will not automatically install the latest version of MANUS Core but will only install the chosen version of MANUS Core.
Updating MANUS Core
Check for Updates
In MANUS Core, go to the settings panel and scroll down. At the bottom you will find the ‘Check for Updates’ button.
If you get the following message, but are not running the latest version of MANUS Core, you will need to remove MANUS Core from your device and install the latest version manually, which you can download from our Download Center.
Maintenance Tool
Navigate to the MANUS Core installation folder C:\ProgramFiles\MANUS\Core x.x.x and start MaintenanceTool.exe.
This opens the MANUS Setup Wizard. Here you need to choose ‘Update Components’.
.png)
Click ‘Next’
This will start and complete the updating process.
