Prime 3 Gloves | LED's
Note: This article applies to both Prime 3 Haptic XR Gloves and Prime 3 Mocap Gloves
Note: This article applies to both Quantum Mocap Metagloves and Quantum XR Metagloves.
Overview
There are two indication LED's on the gloves.The glove status LED and the battery status LED.
Battery Status LED
No Power
If the Glove switch is in the ON position and a battery is inserted in the casing, but no lights are on, the Battery is empty and needs to be recharged.
Battery Charging
If the Battery Status LED is RED, the battery is charging
Battery Full
If the Battery Status LED is GREEN, the battery is full and no longer charging
Glove Status LED
Pairing Mode
The light will be BLINKING BLUE when the gloves are trying to pair to a dongle.
Connected Wirelessly
The light will be SOLID BLUE when the glove is connected wirelessly
Idle Mode
When the gloves have not been used/moved for some time, the status LED will breathe blue.
Booting Up
After switching your gloves on, the STATIC WHITE light indicates the gloves are booting up.
Battery Low
When your battery level is low the Status LED will BLINK RED.
Connected Wired
When your gloves are connected to a PC wired the LED will be SOLID GREEN.
Error or Issue
When your gloves are experiencing issues the Status LED will BLINK YELLOW / AMBER.
In this event, please contact our support team.
