Prime X | Attachments
Note: This article applies to both Prime 3 Haptic XR Gloves and Prime 3 Mocap Gloves
Note: This article applies to both Quantum Mocap Metagloves and Quantum XR Metagloves.
This tutorial can be used for all Prime II and Prime X gloves, including both the Xsens PRO and OptiTrack PRO partner models.
Introduction
The Prime II and Prime X series gloves can be used with a large variety of different tracking systemem. To add hand and finger tracking to your personal tracking setup MANUS offers a set of adapters to connect trackers to the top of the gloves.
HTC Vive Tracker
STEP 1
Align the VIve adapter on the back
STEP 2
Screw it in place
STEP 3
Slide it on the universal mount. The HTC Vive tracker is now ready to be calibrated and used.
Oculus Controller
STEP 1
Insert the Oclulus adapter
STEP 2
Check the Orientation. Make sure you have the correct Left and Right orientation.
STEP 3
Slide it on the universal mount.
OptiTrack
STEP 1
Slide in the OptiTrack adapter.
STEP 2
Slide it on the universal mount. The OptiTrack tracker is now ready to be used.
ART Tracker
Slide the ART Tracker on the Glove. The ART tracker can be mounted directly to the universal mount.