Xsens Metagloves | Adapters
Note: This article applies to both Prime 3 Haptic XR Gloves and Prime 3 Mocap Gloves
Note: This article applies to both Quantum Mocap Metagloves and Quantum XR Metagloves.
Introduction
The Xsens Metagloves use the MANUS Universal Mounting System. Through the mounting system you can connect adapters for both Xsens Link and Xsens Awinda.
Xsens Link & Awinda
Both a Link and Awinda adapter are included with the Xsens Metaglove.
- Slide the sensor into the adapter
- Secure the sensor into place by closing the clip on the adapter
- Slide the adapter onto the universel mount.
